Wall-panel DCP remote controllers for DME7, MTX/MRX, and MA/PA Series: volume knobs and programmable switch buttons for zone-level control in installed audio systems.
The DCP Series are 1-gang Euro-style wall-panel remote controllers for Yamaha installed audio processors. Three panel configurations cover common zone-control scenarios, the DCP1V4S provides a single volume knob with four programmable switches, the DCP4V4S adds four independent volume controls, and the DCP4S is a four-switch panel for systems that manage volume at the processor level. All panels connect via CAT5 cable (RS-485) to the host processor.
Each control port on a compatible processor supports up to 8 DCP panels. For larger installations requiring more panels, the DCH8 Digital Controller Hub splits one port into eight, supporting up to 64 panels per hub. Compatible systems: DME7, MTX5-D, MTX3, MRX7-D, and MA/PA Series power amplifiers.
DCP1V4S (1 vol + 4 sw), DCP4V4S (4 vol + 4 sw), DCP4S (4 sw), covering single-zone and multi-zone installed audio control scenarios.
Connects via standard CAT5 cable on an RS-485 bus, no specialised cabling required, supporting extended cable runs in commercial installations.
Each processor DCP port supports up to 8 panels daisy-chained on one run. Add a DCH8 hub to expand to 64 panels per port for large multi-zone systems.
Works with DME7, MTX5-D, MTX3, MRX7-D, and MA/PA Series, providing consistent zone-control hardware across the full Yamaha installed-audio processor range.
Hardware and feature specifications for the DCP Series range.
Our team of experts is ready to help you find the perfect Yamaha instrument or audio product for your needs. Get personalised advice and competitive quotes.
We're here to help with any questions
